Print this
page, complete the survey and fax to (719) 634-5775
WATER TREATMENT APPLICATION SURVEY
Water Analysis:
|
Temperature _____________ |
Total Dissolved Solids ______ |
pH _________ |
Turbidity_________ |
|
Coliform Bacteria _________ |
Total Bacteria_____________ |
Total Hardness____ |
Adkalinity________ |
|
T.O.C. __________________ |
B. 0. D._________ |
Calcium _________ |
Magnesium _______ |
|
Potassium_______________ |
Sodium__________ |
Barium__________ |
Strontium_________ |
|
Ammonium ______________ |
Iron _____________ |
Manganese _______ |
Chloride__________ |
|
Hydrogen Sulfide __________ |
Carbon Dioxide ____________ |
Carbonate________ |
Bicarbonate_______ |
|
Sulfate__________________ |
Fluoride_________ |
Nitrate___________ |
Phosphate_________ |
|
Silica ___________________ |
Other Known Contaminants of Concern _____________________________ |
Water Source_____________________________________________________________
End Use of Treated Water___________________________________________________
End Use Water Quality Requirements __________________________________________
Volume of treated water required (per day) _________ Duration of use (hours) _________
Peak flow of treated water required (GPM) _______ Duration of peak flow (minutes) ____
Source water flow limitations (if any) __________________________________________
Source water pressure (min/max) ______________________________________________
Space limitations for equipment: Length ______ Width _______Height ______
Location (indoor/outdoor/describe) ____________________________________________
Ambient temperature: Min __________ Max __________ Average __________
Pipe size/type to treatment equipment __________________________________________
Available Drain (describe) __________________________________________________
Limitations on discharge to drain ______________________________________________
Available electrical power (volts,amps, hertz, phase) ______________________________